1000m3/h 630 kw single stage double suction split case centrifugal pump

single stage double suction split case centrifugal pump in Cyprus

• Capacity: 1000m3/h
• Head: 145m
• Nominal Speed: 1500rev/min
• NPSH required not more than 6m, at operating point.
• Motor 630 kw

The motor will operate on the current stated in the specification 400/230 V, 3 phase, 50 Hz. stainless steel 304 shaft sleeve is acceptable.

The water temperature is ambient .Also I attach the full specification of the pump and motor we need. Please study it and complete the attach form including catalogues. Prices to be CIF Limassol Cyprus valid for three months. Delivery within 8 months from order.

1000m3/h 630 kw single stage double suction split case centrifugal pump

1000m3/h 630 kw centrifugal pump – Bulletproof Pump

Thank you for your inquiry about single stage double suction split case centrigual pump, it’s exactly what we are good at.

Actually just yesterday we receieved an order about 49pcs double suction pumps from customer in Uzbekistan.

We have checked the attachment, and there are two questions below:

1. When the motor is 630kw, it belongs to the high voltage motor, we suggest using it in 6KV or 10KV power supply.

2. As showed in the attachment, the shaft sleeve requirement is bronze, actually bronze shaft sleeve is not wear resistant, so we recommend stainless steel 304 shaft sleeve.

Contact To Us